Rollei 35 variants compared — Buying advice 2025
Share
Community tip: CasualPhotophile
One of the best English-language articles on the Rollei 35 SE — with honest buying advice and practical experience.
Table of Contents
- The Rollei 35 — a camera that almost never existed
- All variants in direct comparison
- Tessar, Sonnar, Triotar — the lenses explained
- Light meters and the battery problem
- Practice: Zone focusing, film tips, and common mistakes
- Ergonomic quirks (The Rollei quirks)
- Buying used — What you need to watch out for
- Ausgeknipst Accessories for the Rollei 35
The Rollei 35 — a camera that almost never existed
In 1962, Heinz Waaske sat in his office at Wirgin in Wiesbaden, working on a prototype that no one wanted. The idea: a full-featured 35mm camera that fits in a jacket pocket. Without compromising on image quality.
Waaske offered his design to Wirgin, then Leitz, then Kodak. No one was interested. The camera was too small, they said. Too unconventional. Too risky.
In January 1965, Waaske joined Rollei in Braunschweig. Two months later, managing director Heinrich Peesel discovered the prototype — and immediately ordered serial production. In October 1966, Rollei presented the camera at Photokina in Cologne. It was the smallest full-frame 35mm camera in the world.
The clever design feature
The retractable lens reduces the camera’s depth to under 6 cm — one third the volume of comparable 35mm cameras of the time. The shutter is located behind the lens instead of in front. Aperture and shutter speed are set via dials on the front, not on top of the body. Everything about this camera breaks conventions.
Over the next 30 years, more than two million Rollei 35 cameras were produced in various versions. The first series was made in Braunschweig; from 1971 Rollei moved production to Singapore. Rollei went bankrupt in 1981. After the 1981 bankruptcy, the new owners resumed production of the revised Classic series in Braunschweig starting in 1990.
Today, almost 60 years later, the Rollei 35 is one of the most sought-after analog compact cameras. And there are enough variants to get thoroughly confused. That’s exactly why this article exists.
All variants in direct comparison
The following table lists all relevant Rollei 35 models. Important: Not every camera with "35" in the name belongs to the same family. The XF 35 is a completely different type of camera (rangefinder with program auto), but carries the name. The "Rollei 35 AF" introduced in 2024 is not made by Rollei, but by MiNT Camera (Hong Kong) under official naming license. It has a 35mm f/2.8 lens, LiDAR autofocus (no zone focus), automatic exposure, and a built-in flash. It is a modern point-and-shoot and must be strictly separated historically and technically from the analog originals.
| Model | Years of Production | Lens | Aperture | Light meter | Battery | Origin | Price (approx. 2025) |
|---|---|---|---|---|---|---|---|
| Rollei 35 | 1966–1971 | Zeiss Tessar 40mm | f/3.5 | CdS (needle, top) | PX625 (1.35V) | Germany | 300–500 EUR |
| Rollei 35 (SG) | 1971–1974 | Zeiss Tessar 40mm | f/3.5 | CdS (needle, top) | PX625 (1.35V) | Singapore | 250–400 EUR |
| Rollei 35T | 1974–1980 | Zeiss Tessar 40mm | f/3.5 | CdS (needle, top) | PX625 (1.35V) | Singapore | 250–400 EUR |
| Rollei 35S | 1974–1981 | Zeiss Sonnar 40mm | f/2.8 | CdS (needle, top) | PX625 (1.35V) | Singapore | 300–500 EUR |
| Rollei 35TE | 1979–1981 | Zeiss Tessar 40mm | f/3.5 | LED (in viewfinder) | PX27 (5.6V) | Singapore | 300–450 EUR |
| Rollei 35SE | 1979–1981 | Zeiss Sonnar 40mm | f/2.8 | LED (in viewfinder) | PX27 (5.6V) | Singapore | 350–550 EUR |
| B35 / Rollei 35B | 1969–1978 | Triotar 40mm | f/3.5 | Selenium (battery-free) | None | Singapore | 100–200 EUR |
| C35 | 1969–1971 | Triotar 40mm | f/3.5 | No meter | None | Singapore | 80–150 EUR |
| Rollei 35LED | 1978–1981 | Triotar 40mm | f/3.5 | LED (in viewfinder) | PX27 | Singapore | 150–250 EUR |
| Rollei 35 Classic | 1990–1999 | Zeiss Sonnar 40mm | f/2.8 | CdS (needle, top) | PX625 (1.35V) | Germany | 500–900 EUR |
| XF 35 | 1974–1980 | Sonnar 40mm | f/2.3 | CdS program | PX625 | Singapore | 100–200 EUR |
| Rollei 35AF | from 2024 | 35mm | f/2.8 | Electronic | Modern | China | approx. 800 EUR |
| Rollei 35 (S-Xenar) | 1972–1973 | Schneider-Kreuznach S-Xenar 40mm | f/3.5 | CdS (needle, top) | PX625 (1.35V) | Singapore | 350–550 EUR |
Quick recommendation
For photographers: Rollei 35SE or 35S — best lens, reliable metering (SE), compact design.
Best value for money: Rollei 35T — identical image quality to the original, often cheaper.
For collectors: Rollei 35 (Made in Germany) or 35 Classic (Titanium/Gold/Platinum editions).
Budget entry: B35 — affordable, no battery issues, but simpler Triotar lens.
Note: XF 35 ≠ Rollei 35
The Rollei XF 35 is a completely different camera — a rangefinder with program auto exposure and a fixed 40mm f/2.3 Sonnar. No retractable lens, no manual exposure control. Good lens, but a totally different concept.
Tessar, Sonnar, Triotar — the lenses explained
The optics are the main distinguishing feature between the Rollei 35 models. Three lens types were used — all with the same 40mm focal length but fundamentally different designs.
Carl Zeiss Tessar 40mm f/3.5 — the classic
Four lenses in three groups. The Tessar design dates back to 1902 and was still one of the sharpest constructions for this format in 1966. In the Rollei 35 it delivers razor-sharp images from f/5.6, with slight softness wide open — typical for Tessar designs.
Earlier German versions were only single coated. Direct backlight can cause flares. A UV filter helps. Tessar lenses were consistently only single coated by Rollei in all model lines.
Used in: Rollei 35 (Original), 35T, 35TE
Carl Zeiss Sonnar 40mm f/2.8 — the premium lens
Five lenses in four groups. Half a stop faster than the Tessar, with noticeably better contrast and pleasant bokeh at wide open aperture. Among collectors and photographers, the Sonnar is considered the better choice — reflected in the prices.
The Sonnar was made in the Rollei/Zeiss joint venture in Singapore, under Carl Zeiss license. No quality difference compared to German Zeiss lenses.
Used in: Rollei 35S, 35SE, 35 Classic
Schneider-Kreuznach S-Xenar 40mm f/3.5 — the rare Tessar clone
Between 1972 and 1973, Carl Zeiss couldn’t supply enough Tessars to the new factory in Singapore. Rollei temporarily bought lenses from the renowned German manufacturer Schneider-Kreuznach. Optically, the S-Xenar is almost identical to the Tessar (4 lenses in 3 groups), but due to the smaller quantity (approx. 30,000), it is much more sought after by collectors.
Triotar 40mm f/3.5 — the beginner’s lens
Three lenses, triplet design. Simple, affordable, lightweight. Quite usable at smaller apertures (f/8 and smaller), noticeably softer wide open than Tessar and Sonnar. The Triotar was the budget option for Rollei’s entry-level models.
Installed in: B35/35B, C35, 35LED
Practical tip: Tessar or Sonnar?
In everyday use, the difference is small — especially at f/8 and smaller apertures. If you use zone focusing (which you do with the Rollei 35), you rarely shoot wide open. The half-stop of the Sonnar is relevant for indoor shots and low light. For daylight street photography, the Tessar is just as suitable.
Light meters and the battery problem
Three different light meter systems were used in the Rollei 35. Which system is installed affects everyday use more than the lens choice.
CdS meter with needle display (35, 35T, 35S, Classic)
A cadmium sulfide sensor measures the light and moves a needle on the top of the camera. You have to take the camera away from your eye to read the display — slowing you down, but precise. The sensor is sensitive to light direction and can give false readings in strong side light.
Problem: These models require a 1.35V mercury battery (PX625), which has been banned for over 20 years.
LED meter in the viewfinder (35TE, 35SE, 35LED)
Three LEDs in the viewfinder — red top (overexposed), green middle (correct), red bottom (underexposed). Faster and more intuitive than the needle display. You can measure without lowering the camera.
These models use a 5.6V PX27 battery — also mercury, also no longer available. Adapters exist.
Selenium meter (B35/35B)
Battery-independent — an advantage, but overshadowed by the aging of the selenium cell. After 40+ years, many selenium meters are sluggish or completely dead. If you find a B35 with a working selenium meter, you're lucky.
Solving the battery problem
The original mercury batteries (PX625 for CdS models, PX27 for LED models) are no longer available. Three alternatives are available:
| Solution | Price | Voltage | Lifespan | Recommendation |
|---|---|---|---|---|
| Zinc-air hearing aid battery (Type 675) + rubber ring | approx. 2 EUR | 1.4V → 1.35V | Weeks–months | Cheapest solution, short-lived |
| WeinCell MRB625 | approx. 8–12 EUR | 1.35V | Weeks–months | Correct voltage, no adapter needed |
| MR-9 Battery Adapter + Silver oxide battery | approx. 15–25 EUR | 1.5V → 1.35V | Months–years | Best long-term solution — buy once |
| Alkaline PX625A / LR44 (1.5V direct) | approx. 2 EUR | 1.5V | Months | NOT recommended — up to 2 stops deviation |
Tip: MR-9 Adapter
An MR-9 adapter (also called PX625 adapter) reduces the voltage of a standard silver oxide battery from 1.5V to the correct 1.35V. Once purchased, it can be used forever — only the inexpensive battery needs replacing. We offer a universal PX625 adapter that fits all Rollei 35 CdS models.
Practice: Zone focusing, film tips, and common mistakes
The Rollei 35 has no rangefinder. No ground glass, no autofocus, no split-image indicator. Focus is set using a distance scale on the lens — called zone focusing.
Zone focusing with the Rollei 35
The principle: At smaller apertures (f/8, f/11, f/16), the depth of field is so large that exact focusing is not necessary — an approximate distance is enough.
- Choose aperture: f/8 or smaller. The smaller the aperture, the larger the depth of field.
- Estimate distance: 1–2 meters for portraits. 3–5 meters for street. Infinity for landscapes.
- Use hyperfocal distance: At f/11 and focus set to 5 meters, due to depth of field, everything from about 2.5 meters to infinity is sharp. If you fix the focus at 3 meters (typical for street photography), be aware that the distant background will be out of focus.
- Set focus beforehand: Adjust the focus ring before taking the shot, not at the moment of release.
Practical tip: The 3-meter rule
Set the focus for street photography to 3 meters, the aperture to f/8 or f/11. The immediate foreground is sharp, the background (infinity) becomes blurry. For landscapes or when you want everything sharp, choose f/11 and set the distance to 5 meters (hyperfocal distance).
Film recommendations
The Rollei 35 works with any standard 35mm full-frame film. Some combinations are especially successful:
| Film | ISO | Type | Works well for |
|---|---|---|---|
| Kodak Portra 400 | 400 | Color negative | Portraits, soft light, skin tones |
| Kodak Gold 200 | 200 | Color negative | Daylight, travel, budget all-rounder |
| Fuji Superia 400 | 400 | Color negative | Street, travel, versatile |
| Ilford HP5+ | 400 | B/W negative | High contrast scenes, push processing possible |
| Ilford FP4+ | 125 | B/W negative | Fine grain, landscape, good light |
| CineStill 800T | 800 | Color negative | Low light, night, artificial light |
Typical mistakes when handling the Rollei 35
Warning: The Rollei 35 camera death (lens mechanism)
The absolute core rule of the Rollei 35, which if ignored will immediately cause mechanical total damage to the camera: The lens must NEVER be unlocked and pushed back into the body before the shutter is cocked (the film advanced). If you try to force the lens back with the shutter uncocked, the internal transmission mechanism will break irreparably.
The ironclad sequence is:
1. Release the shutter
2. Cock the shutter (advance the film)
3. Press the release button
4. Turn and retract the lens.
Other common mistakes:
- Battery death from missing lens cap: Contrary to persistent internet myths, CdS models (Rollei 35, T, S, Classic) have NO switch on the lens. The light meter is always active. The battery is only preserved if the meter eye is in darkness (camera bag, lens cap, or battery saver). Only the LED models activate metering by pressing the shutter button.
- Wrong battery voltage: Using 1.5V instead of 1.35V causes systematic underexposure (about 1.5 to 2 stops too dark) — especially fatal with slide film, since underexposure leads to black, unusable images.
- Finger in front of the meter window: The compact design tempts you to cover the CdS sensor with your finger.
- Focus not set: With zone focusing, it’s easy to forget to adjust the distance when the subject distance changes.
Ergonomic quirks (The Rollei quirks)
An honest practical buying guide can’t hide the completely unconventional ergonomics of the Rollei 35. These quirks give the camera its charm but are also the most common reason frustrated beginners resell it:
- Flash shoe on the bottom: When using a flash, the camera must be held upside down (with the flash housing facing down). Otherwise, the extended lens would cast "monster shadows" from below onto the subject’s face.
- Left-handed film advance: The cocking lever is on the left side of the body and operated with the left thumb — unlike almost every other camera in the world.
- Frame counter on the bottom: To read the current film count, you have to turn the camera upside down.
Buying used — What you need to watch out for
A Rollei 35 is at least 44 years old. Some examples are over 60. Mechanical cameras age — and the Rollei 35 has some well-known weak spots.
Pre-purchase checklist
| Checkpoint | What to check | Red flag |
|---|---|---|
| Shutter | Fire all speeds through (B to 1/500). Listen for sounds. | Shutter blades sticking open, slow speeds hang |
| Lens | Hold against light. Check lens groups. | Fungus (white threads), haze (milky veil), dust inside |
| Light meter | Compare with smartphone app (e.g. LightMeter). | Deviation > 1 stop, needle doesn’t move |
| Body | Check top and bottom for dents. | Severe dents that could block the mechanism |
| Film advance | Cock lever, release, check counter. | Grinding, blocking, counter doesn’t advance |
| Battery compartment | Open cover, check contacts. | Green/white corrosion (leaked battery) |
| Viewfinder | Look through, check for clarity. | Cloudy, dust, LED not working (on TE/SE) |
| Lens retraction mechanism | Extend and retract lens. | Jams, doesn’t lock in, wobbles |
CLA — Clean, Lubricate, Adjust
For cameras of this age, a CLA (professional cleaning, lubrication, and adjustment) is almost always worthwhile. Costs 80–150 EUR depending on the workshop. Some dealers sell CLA-serviced units with warranty — this is the safest but also the most expensive option.
Where to Buy?
- eBay (Classifieds and Auctions): Largest selection, but risk with uncontrolled sales.
- Specialized Dealers: FilmFurbish (UK), Kamerastore (FI), Japan Camera Hunter — CLA and warranty included, surcharge 30–50%.
- Flea Markets and Camera Fairs: Hands-on inspection possible, often fair prices.
- Reddit r/photomarket and Photrio: Community sales, often with honest condition descriptions.
Independent Test by FilmFurbish (Source)
Jeremy from FilmFurbish has been repairing and selling Rollei 35 cameras for years. His assessment:
- Quality Difference Germany/Singapore: Hardly noticeable. Only minor part changes without impact on function or feel.
- Meter Accuracy: Good, but not as precise as a handheld light meter. No problem for negative film. A metering app is recommended for slide film.
- Price Development: The 35S with Sonnar has nearly doubled in price over two years (as of 2023).
Ausgeknipst Accessories for the Rollei 35
We offer two battery adapters that solve the mercury battery problem of the Rollei 35 — one for the CdS models (PX625) and one for the LED models (PX27):
Universal PX625 Battery Adapter — for Rollei 35, 35T, 35S, Classic
PX27 Battery Adapter — for Rollei 35 SE, 35 TE, and 35 LED
Two-Piece Hard Case for Rollei 35 S, SE, T, TE
Lens Cap for Rollei 35 (Tessar Versions)
Lens Cap for Rollei 35 S (Sonnar) & B 35
The battery adapter is the most cost-effective long-term solution for the PX625 issue — it reduces the voltage of a standard silver oxide battery to the correct 1.35V and fits all Rollei 35, 35T, 35S, and Classic models (not in 35TE/SE/LED, which use PX27).
Video Tips
Two of the best video overviews of the Rollei 35 family:
TechHeritage presents seven Rollei 35 models in a hands-on comparison — including tips on battery replacement and loading film.
FABS IN THE WILD compares the entire Rollei 35 family — with a special focus on the 35 SE as a buying recommendation.
Not sure which scanner set you need?
3 questions, personalized recommendation — in under 60 seconds.
Overview of All Products
From battery adapters to scanning systems — everything for analog photographers.
More Guides and Comparisons
Questions answered before you even ask — our blog for analog photographers.